Prices

Head/partial/full suit commissions are limited to openings only.
> Quote form for large commissions <
tails, paws, and other small commissions are always open! Email me at birdkingcreations@gmail.com or message me @birdkingcreations on instagram for a quote
Wondering about a feature you don't see listed? Just ask about it in the quote form!

Note: all listed prices are only base prices!
Things that can increase the price during a quote include: small or intricate markings, asymmetry or markings that don't follow the natural seams of the suit, many colors, unusual furs, additional parts like feathers, wings, and spikes, and rare or expensive materials outside of my usual supply.

Plantigrade Fursuit - Starts at $1800

A full fursuit including a head, body, handpaws, plantigrade style feetpaws, and a tail with belt loops that will also zipper onto the body for a seamless appearance. This will have no body padding and be easy to wear, wash, and store! Requires a DTD to be made. See dedicated sections for add-ons and features to heads, handpaws, feetpaws, and tails.
Partials can be upgraded to a full suit later however it's recommended to get the whole suit done at once in order to ensure the fur is from the same dye lot, and if you want the tail to be able to zipper onto the body.

Refer to the detailed sections below for all add-ons and features of the individual parts.

Digitigrade Fursuit - Starts at $2100

A full fursuit including head and handpaws, and a padded body with a tail and feet that zipper on for a seamless look. The legs have removeable pieces of padding, and a different foot shape, in order to create the illusion of an animal's digitigrade leg shape.
Partials can be upgraded to a full suit later however it's recommended to get the whole suit done at once in order to ensure the fur is from the same dye lot, and if you want the tail to be able to zipper onto the body.

Refer to the detailed sections below for all add-ons and features of the individual parts.

Head/Partial - Starts at $900

A toony fursuit head built on a foam base, it can have 2d eyes or 3d "follow-me" eyes. Always have plenty of room around the eyes and nose to be glasses friendly! No moving jaw or electronic parts.
I can work with expanding foam or resin bases by other makers, as long as their style will compliment my own, so I must approve it during the quote phase. Head price wont change unless its a particularly higher demand base above the usual price range.

Extras:
+$30 first set of removeable eyelids
+$15 each extra set of removeable eyelids
Quote: other magnetic parts such as hair poofs, tongues, or other removeable features. I do not do magnetic brows due to my style already having rounded brows.

Partials:
+$200 handpaws
+$50 armsleeves, held up via an elastic strap that goes across the wearer's back
+$200 outdoor feetpaws with strong rubber soling bottoms
+$250 indoor feetpaws with fur and paw pads
+$300 one set of feetpaws with interchangeable bottoms to have both indoor and outdoor styles
+$50-$150 or more for tails, price depends on size
+$70-$200 wings that can be worn as a partial, using magnets and a harness under your shirt. Small simple fleece wings are the cheaper end and larger sized detailed wings are the higher range.

Refer to the detailed sections below for all add-ons and features of the individual parts.

Handpaws - Start at $200

Feetpaws - Start at $200

4 finger handpaws with stuffed fingers and applique paw pads. They are cuffed and fully lined! May cost a bit more if the paw pads are spotted or there's multiple small/intricate markings.

Extras:
+$50 round stuffed paw pads (note: these make it hard to grab things but the perk is they're cute and extra poofy)
+$50 armsleeves, separate and held up with an elastic strip that goes behind your back.

No paw pads? Hands for species that don't fit in my usual paw pattern can be done, pricing via inquiry.

Plantigrade styled feet that are good for wearing with partials or just by themselves! These do not use shoes in their construction and always feature a fabric liner with an eva foam piece under it for comfort. I will need your foot length to ensure the liner will fit well. You can insert your own shoe liners to also add support if needed. Outdoor feet have rubber soling on the bottom to ensure they are durable for all walking surface types. May cost a bit more if the paw pads are spotted or there's multiple small/intricate markings.

Extras:
+$50 Instead of rubber soling on the bottom, there is fur and flat paw pads. This should only be used indoors to increase their lifespan.
+$100 magnetic interchangeable feet bottoms to have both indoor and outdoor finishes

Body Only

Tails

Digitigrade bodies require feet to be made with the body due to the calf padding being built into the feet, and the zipper attachment between the body and feet.
I will do my best to color match to existing fursuit parts but it might not be guaranteed due to slight differences in fur produced at different times. If I need to get a particularly expensive fur I will have to charge extra for it.

Plantigrade body only: $450
+$200 handpaws
+$200 outdoor feetpaws with strong rubber soling bottoms
+$250 indoor feetpaws with fur and paw pads
+$300 one set of feetpaws with interchangeable bottoms to have both indoor and outdoor styles
+$50-$150 or more for tails, price depends on size

Digitigrade body and feet: $950
+$200 handpaws
+$50 change to indoor feet bottoms
+$100 magnetic interchangeable feet bottoms to have both indoor and outdoor finishes
+$300 extra set of feetpaws, either to have indoor bottoms sewn on or an alt style of foot
+$50-$150 or more for tails, price depends on size

Tail prices are easier done via quote due to the large number of things that can affect price. Most will be stuffed with polyfil and a small foam base to give the belt loops stability. A tail that needs to hold a very specific and upright shape may be partially foam and will cost more.

The below prices are examples based on size but note that thickness, colors, markings, and extra features like feathers or spikes also affect price.

$50 for nub or small tails (<2ft)
$70 for standard canine tails (2-3ft)
$100 for large tails like cats or red pandas (3-4ft)
$150+ angel dragon or other floor dragger (around 4ft+)

Wings

Wings start at $30 for small simple ones sewn onto the body and go up to $150 on size and complexity.
+$50 to have the wings finished with magnets, and a harness made for wearing under your shirt or suit body so that they can also be worn alone for partial suits.

contact me at birdkingcreations@gmail.com